SET IPTV Not Working? Easy Fixes for Every Problem

SET IPTV not working? Fix no playlist found, cannot connect to the server, movies and series, wrong MAC, expired trial, EPG, buffering and VPN problems.

November 11, 2026
By IPTV Guide
11 min read
0 Comments

Quick Summary

Most SET IPTV problems are fixed in a minute: close the app and open it again (SET IPTV has no Reload button), check that your playlist URL starts with http:// (not https://), and make sure the MAC on the SET IPTV website matches the MAC in the app. Stopped after 7 days? Your trial ended: activate your device. Using a VPN? Use your provider’s VPN DNS.

Good to Know: SET IPTV Has No Channels of Its Own

SET IPTV is only a player. It doesn’t provide any channels, playlists or subscriptions, so if your channels stop working, the problem is often your IPTV subscription or login details. Check them with your provider first.

SET IPTV usually works well on Firestick, Android TV, Samsung, LG and Android phones, but a playlist that doesn’t show up, movies that won’t start or a cannot connect to the server error can be frustrating. This guide lists every common SET IPTV problem and the fix for each one, step by step.

Playlist Not Working Because the URL Starts With https://

A very common mistake: the M3U link or the Xtream Codes Server address starts with https://. Most IPTV servers only work with http://, so SET IPTV loads nothing. On the SET IPTV website, select Load current setup, change https:// to http://, select Send to my TV, then close and reopen the app.

http://example-server.com/get.php?username=XXXX&password=XXXX&type=m3u_plus&output=ts

Quick Checklist: Try These First

Check that your internet works on another app (YouTube, Netflix).
Restart your internet to get a new IP address: unplug your router or modem for 1 minute, plug it back in and wait until it’s fully online.
Close SET IPTV and open it again. There is no Reload button: reopening the app loads your latest playlist.
Turn the TV or Firestick off at the wall for 1 minute (a real restart, not standby).
Check with your provider that your IPTV subscription is still active.

Movies and Series Not Working in SET IPTV

Use Xtream Codes instead of M3U: M3U playlists often load movies and series badly. Add your playlist with the Xtream Codes tab on the website (see how to add Xtream Codes), or with Add manually in the app.
Close and reopen SET IPTV after your provider adds new movies or series.
Try another title: if only one movie fails, the file may be missing on your provider’s server. Report it to your provider.
Check your connection speed: 4K movies need about 25 Mbps.

SET IPTV Not Loading or “Cannot Connect to the Server”

Close the app completely and open it again.
Clear the cache: Settings > Storage > Clear cache. On Firestick or Android TV, force-close it in Settings > Applications.
Wait for big playlists: the first load can take a minute.
Check the server: it must start with http:// and match exactly what your provider sent.
Remove playlists you don’t use: on the website, load your setup and untick Active playlist for old playlists, or delete them in the app.
Update the app and your device software.

SET IPTV Playlist Not Working or “No Playlist Found”

“No playlist found”: no playlist is linked to this MAC yet. Add your playlist on the website or with Add manually, then close and reopen the app.
Check the status in My Playlists: the playlist card should show Online and Active. If not, check your login details.
Check your login details: type the username and password exactly as your provider sent them (they are case-sensitive).
Check your subscription: an expired IPTV subscription loads no channels. The playlist card shows its Expiration date.
Connections 1 / 1: your login is already used on another device. Close it there first.

Playlist Not Showing: Wrong MAC Address

SET IPTV sends your playlist to the device with the MAC you typed on the website. One wrong character and the playlist goes nowhere:

Open the Playlists section in the app and compare the MAC with the one on the website.
Type it with the colons, and don’t mix up 0 (zero) and O, or 1 and I.
A new TV or device has a new MAC: add your playlist again for the new MAC.

SET IPTV Stopped Working After 7 Days (Trial Expired)

Every device gets a 7-day free trial. The days left are shown at the top of the Playlists screen. When the trial ends, SET IPTV stops playing until the device is activated: open the SET IPTV website, select Activate my device and use the same MAC address. Buying a 6 or 12-month IPTV subscription? Your provider can activate it for free: see the SET IPTV subscription guide.

SET IPTV EPG (TV Guide) Not Working

Use Xtream Codes: with Xtream Codes, the TV guide usually loads automatically from your provider.
Use the EPG from your provider: the EPG URL comes with your IPTV login details, in the free trial or the paid version.
Close and reopen the app and wait a few minutes: the guide can take time to appear.
Wrong times? Check the time zone and clock of your device.
Some channels have no guide: that’s normal if your provider doesn’t send EPG for them.

SET IPTV Buffering or Freezing

Use an Ethernet cable instead of Wi-Fi, or move the router closer. HD needs about 10 Mbps, 4K about 25 Mbps.
Restart the router and the device.
Close other apps and downloads using your internet.
If only some channels freeze, the problem is on the provider’s server: report the channels to your provider.
Your internet provider may slow down IPTV: try a VPN with your provider’s VPN DNS (see below).

SET IPTV Not Working With a VPN

Many IPTV servers block VPN IP addresses, so SET IPTV shows a connection error or loads no channels when your VPN is on. The fix is to use your provider’s VPN DNS: it always comes with your IPTV login details and always starts with vpn. If your provider didn’t send one, contact them. On the SET IPTV website, load your setup, replace the server with the VPN DNS, send it to your TV and reopen the app.

Example: VPN DNS for Xtream Codes and M3U

VPN DNS:

http://vpn.dream-4k.co

Xtream Codes Server address:

http://vpn.dream-4k.co

M3U link:

http://vpn.dream-4k.co/get.php?username=YOUR_USERNAME&password=YOUR_PASSWORD&type=m3u_plus&output=ts

Still not working? Change the VPN server or country, try another VPN protocol (for example WireGuard), and turn off the VPN’s ad or tracker blocker.

Clear the SET IPTV Cache

Old data saved in the app can stop a playlist, movies or the TV guide from loading, even when your login is correct. SET IPTV has its own Clear cache option:

Step 1: Open Settings

On the SET IPTV home screen, select Settings at the bottom of the menu on the left.

Step 2: Select Storage > Clear cache

In Settings, select Storage, then Clear cache. Don’t select Reset settings unless you want to reset all the app options.

Step 3: Select Yes

When the app asks Are you sure you want to clear?, select Yes. Then close SET IPTV and open it again: your playlist reloads fresh. Your playlists stay saved on the SET IPTV website, so you don’t lose them.

SET IPTV Parental Control: Lock Adult Channels

Watching with children? SET IPTV has a parental control code that hides and locks adult channels. Set your own code first, then turn the protection on.

Step 1: Open Settings > Parental Control

Open Settings from the home screen and select Parental Control. You see four options: Parental control, Change parental code, Hide adult channels and PIN for hidden channels.

Step 2: Change the Parental Code

Select Change parental code. Type a 4-digit New code, type it again in Confirm code, then select Validate. Choose a code your children can’t guess and keep it somewhere safe.

Step 3: Turn On the Protection

Parental control: switch it ON to activate the parental lock.
Hide adult channels: switch it ON so adult categories don’t appear in Live TV.
PIN for hidden channels: switch it ON to ask for your code before hidden channels can be opened.

Forgot Your Parental Code?

If you forget the code, contact SET IPTV support from the website with your MAC address. Reinstalling the app may also reset the app settings, but your playlists stay saved on the website.

SET IPTV Not Working on Samsung or LG TV

Update the TV software: Settings > Support > Software Update (Samsung) or Settings > General > About This TV (LG).
Update SET IPTV: open the app page in Samsung Apps or the LG Content Store and select Update if it shows.
Cold restart: unplug the TV for 1 minute.
Clear the cache on Samsung: Settings > Support > Device Care > Manage Storage, select SET IPTV and Clear Cache.
Check the date and time: a wrong TV clock can block connections.

SET IPTV Not Working on Firestick or Android

Clear the cache: on Firestick, Settings > Applications > Manage Installed Applications > SetIPTV > Clear cache. On Android TV or phones, Settings > Apps > Setiptv > Storage > Clear cache.
Force stop in the same menu, then open SET IPTV again.
Free up storage: uninstall apps you don’t use.
Update the app from Google Play, or reinstall it with Downloader code 5345407.

Keep Your Login Private

Never post your MAC address, validation code, Xtream Codes or M3U link in comments or support groups when asking for help. Anyone with them can use your playlist.

Still Not Working? Uninstall SET IPTV and Install It Again

If nothing above fixes it, a clean reinstall usually does. Your playlists are saved on the SET IPTV website with your MAC, so you don’t lose them.

Firestick: Settings > Applications > Manage Installed Applications > SetIPTV > Uninstall.
Android TV / phone: Settings > Apps > Setiptv > Uninstall.
Samsung: open Apps, highlight SET IPTV, open its settings and select Delete.
LG: on the home bar, highlight SET IPTV, hold the center button and select the X.

Restart the device, then install SET IPTV again. Open it: your playlists come back automatically.